19 to, three-way tipping trailer
HTK 19 T - Load-capacity-optimised, rugged three-way tipper
Tandem Three-Way Tipper HTK with 19 t
With a permissible gross weight of 19 tonnes, the HTK 19 is not only ideal for bulk materials such a earth, sand, gravel and concrete, but also construction materials such as bricks and concrete blocks. The design of the tandem three-way tipper is based on the width of a pallet and therefore guarantees the safe transportation of palletised goods. With optimised drive and tip qualities and a relatively low tare weight, the tipper offers a reliable helping hand for heavy-duty work.
Details of the HTK tandem three-way tipper from 19 t:
- Platform frame: with longitudinal and cross struts for maximum stability and point-load resistance; platform floor made from 4 mm highly wear-resistant steel, HB 450; 4 Rocking ball bearings with 2 swap-proof rocker-bearing bolts
- Frame: sturdy, welded and hot-dip galvanised frame for optimum stability and safety, hot-dip galvanised in immersion bath
- Hydraulic three-way tipping system with control via the towing vehicle (max 200 bar); three-tiered telescopic cylinder; hydraulic SVK BG3 plug-in coupling as single circuit connection
- Pneumatic brake with release valve; compressed air coupling heads (red/yellow); anti-lock braking system; EBS brake system with spring-loaded parking brake and 24-volt connection plug. The towing vehicle must be equipped with an ABS socket.
- Hardox® tailgates 800 x 2.5 mm, hinged with central locking; fixed front wall 3 mm; Hardox® HB 450 800 x 2.5 mm hinged rear wall fitted between two sturdy stanchions with automatic tailgate locking; complete cataphoretic and powder coated tipping bridge, single-colour in RAL.
- 24 V lighting system with multiple-chamber tail lamps and LED side marking lamps.
- 2 semicircle mudguards; 2 wheel chocks with holder; contour marking white on the side, red at the back.
- Reinforced 12 t geared support jack with load and fast speeds, on the left in the direction of travel.
TECHNICAL DATA:
| HTK 195025-P | |||
| Permissible gross weight (kg) | 19.000 | Internal dimensions (mm) | 5.010 x 2.420 x 1.000 |
| Own weight (kg) | 4.500 | Body dimensions (mm) | 7.103 x 2.550 x 2.440 |
| Load capacity (kg) | 14.500 | Tilting angle | 50°/50° |
| Load height (mm) | 1.440 | Tyre size | 385/65 R22,5 x 4 pcs. |
.jpg)
