18 to , three-way tipping trailer
Tandem Three-Way Tipper HTK from 18 t
HTK 18 T - Designed for heavy use
The largest and most economical of the three-way tippers has a conveniently low load height for its class and has 600 mm high drop sides giving a large load volume. The extra-wide tyres ensure low ground pressure and mean that you will get through, even on bad roads and tracks.
Details of the HTK tandem three-way tipper from 18 t:
- Axles with drum brake, maintenance-free parabolic suspension for optimal load compensation.
- Pneumatic brake with release valve; compressed air coupling heads (red/yellow); anti-lock braking system; EBS brake system with spring-loaded parking brake and 24-volt connection plug. The towing vehicle must be equipped with an ABS socket.
- 15-way connecting plug
- 2 wheel chocks with retainers
- Reinforced 12 t geared support jack with load and fast speeds, on the left in the direction of travel
- Galvanised central tube with screw-in towing eye Ø 40 mm, galvanised and infinitely variable using a crank handle.
- Laser-welded, high-quality steel sideboards, 500 mm height, can be folded down at the sides and rear, removable and hinged with central lock, bulkhead removable.
- Extra-wide single tyres for low ground pressure.
- 24 V lighting system with multiple-chamber tail lamps, optimally protected and LED side marking lamps.
- Tie-down points: 6 t lashing points recessed in the platform floor (2 pairs / 5.2 m; 3 pairs / 6.2 m); s t lashing points in outside frame (6 pairs / 5.2 m; 7 pairs / 6.2 m)
- Solid, welded, and hot-dip galvanised frame for optimal stability and safety; platform floor made of 4 mm fine grained steel, swap-proof rocker-bearing bolts.
- Platform frame hot-dip galvanised with longitudinal transverse and diagonal struts for high stability and point-load resistance.
- Drop sides primer-painted with high-quality two-component paint for optimal corrosion protection, hollow chambers are sealed, painted in a single colour in RAL as requested.
- Motor-powered, hydraulic three-way tipping system, with high-quality two-component paint for optimal corrosion protection, hollow chambers are sealed, painted in a single colour in RAL as requested.
- Mudguards equipped with anti-spray system, rigid lateral impact protection.
TCHNICAL DATA:
| HTK 185024 | |||
| Permissible gross weight (kg) | 18.000 | Internal dimensions (mm) | 5.040 x 2.420 x 500 |
| Own weight (kg) | 3.900 | Body dimensions (mm) | 6.950 x 2.550 x 1.710 |
| Load capacity (kg) | 14.100 | Tilting angle | 45°/48° |
| Load height (mm) | 1.095 | Tyre size | 435/50 R19,5 x 4 pcs. |
| HTK 185024 (with air suspension) | |||
| Permissible gross weight (kg) | 18.000 | Internal dimensions (mm) | 5.040 x 2.420 x 500 |
| Own weight (kg) | 3.900 | Body dimensions (mm) | 6.950 x 2.550 x 1.710 |
| Load capacity (kg) | 14.100 | Tilting angle | 45°/48° |
| Load height (mm) | 1.135 | Tyre size | 435/50 R19,5 x 4 pcs. |
| HTK 185524 | |||
| Permissible gross weight (kg) | 18.000 | Internal dimensions (mm) | 5.540 x 2.420 x 500 |
| Own weight (kg) | 4.200 | Body dimensions (mm) | 7.450 x 2.550 x 1.710 |
| Load capacity (kg) | 13.800 | Tilting angle | 45°/48° |
| Load height (mm) | 1.095 | Tyre size | 435/50 R19,5 x 4 pcs. |
| HTK 185524 (with air suspension) | |||
| Permissible gross weight (kg) | 18.000 | Internal dimensions (mm) | 5.540 x 2.420 x 500 |
| Own weight (kg) | 4.200 | Body dimensions (mm) | 7.450 x 2.550 x 1.710 |
| Load capacity (kg) | 13.800 | Tilting angle | 45°/48° |
| Load height (mm) | 1.135 | Tyre size | 435/50 R19,5 x 4 pcs. |
